Difference between revisions of "API Nitrate Test Kit"
From The Aquarium Wiki
(Arvil moved page User:Arvil/Sandbox01 to API Ammonia Test Kit: Move to live article.) |
(Corrected link.) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | + | The '''API Nitrate Test Ket''' tests a water sample for the amount of nitrates (NO<sub>2</sub><sup-</sup>)in a sample of fill water or water from your aquarium. A drop test such as the API test is considered more accurate than test strips. | |
+ | |||
+ | == Description == | ||
+ | The API Nitrate Test Kit is a test kit manufactured by [[API|API Fishcare]], a subsidiary of Mars, Inc. It is used to test the level of [[Nitrate|nitrates]] (NO<sub>2</sub><sup-</sup>) in your water in the range of 0 to 160 parts per million (ppm, mg/l). The kit contents are also available in the API Freshwater Master Test Kit. | ||
+ | |||
+ | == Contents == | ||
+ | The API Nitrate Test Kit comes with a 5 ml test tube, a bottle of nitrate test reagent number 1, a bottle of nitrate test reagent number 2, a color comparison chart, and instructions for the user. | ||
+ | |||
+ | == Testing == | ||
+ | *Rinse the test tube a couple of times in the water to be tested to clear out any impurities and old water. | ||
+ | *Fill the tube to the white line (5 ml) with sample water. | ||
+ | *Holding the nitrate reagent bottle number 1 upside down over the test tube, add 10 drops of reagent to the tube. | ||
+ | *I usually put the cap on the tube and invert it over and over for a minute to thoroughly mix the solution. | ||
+ | *Remove the cap and holding the nitrate reagent bottle number 2 over the test tube, add 10 drops of reagent to the tube. | ||
+ | *Replace the cap onto the tube and invert it over and over for a minute to thoroughly mix the solution. | ||
+ | *Let the sample stand for about 5 minutes to allow thorough chemical reaction to take place. | ||
+ | *Hold the tube next to the color chart so the white area of the chart is behind the tube and it is adjacent to the colors on the chart. | ||
+ | *The color closest to the test water indicates the level of nitrates in the water. Target level is less than 40 ppm (mg/l), but acceptable level is less than 40 ppm (mg/l). | ||
+ | *When the test is complete, discard the sample water and rinse the tube several times. I usually keep about 5 ml fresh water in it with the cap on during storage to prevent mineral buildup on the inside of the tube. | ||
+ | |||
+ | == See also == | ||
+ | *[[Nitrate]] here at the Aquarium Wiki. | ||
+ | *[[w:Nitrate|Nitrate]] at Wikipedia. | ||
+ | |||
+ | == External links == | ||
+ | [https://apifishcare.com/product/nitrate-test-kit Nitrate test kit at API Fishcare] | ||
+ | |||
+ | [[Category: Articles]] | ||
+ | [[Category: Products]] | ||
+ | [[Category: Water chemistry]] |
Latest revision as of 12:22, 13 February 2021
The API Nitrate Test Ket tests a water sample for the amount of nitrates (NO2<sup-</sup>)in a sample of fill water or water from your aquarium. A drop test such as the API test is considered more accurate than test strips.
Description[edit]
The API Nitrate Test Kit is a test kit manufactured by API Fishcare, a subsidiary of Mars, Inc. It is used to test the level of nitrates (NO2<sup-</sup>) in your water in the range of 0 to 160 parts per million (ppm, mg/l). The kit contents are also available in the API Freshwater Master Test Kit.
Contents[edit]
The API Nitrate Test Kit comes with a 5 ml test tube, a bottle of nitrate test reagent number 1, a bottle of nitrate test reagent number 2, a color comparison chart, and instructions for the user.
Testing[edit]
- Rinse the test tube a couple of times in the water to be tested to clear out any impurities and old water.
- Fill the tube to the white line (5 ml) with sample water.
- Holding the nitrate reagent bottle number 1 upside down over the test tube, add 10 drops of reagent to the tube.
- I usually put the cap on the tube and invert it over and over for a minute to thoroughly mix the solution.
- Remove the cap and holding the nitrate reagent bottle number 2 over the test tube, add 10 drops of reagent to the tube.
- Replace the cap onto the tube and invert it over and over for a minute to thoroughly mix the solution.
- Let the sample stand for about 5 minutes to allow thorough chemical reaction to take place.
- Hold the tube next to the color chart so the white area of the chart is behind the tube and it is adjacent to the colors on the chart.
- The color closest to the test water indicates the level of nitrates in the water. Target level is less than 40 ppm (mg/l), but acceptable level is less than 40 ppm (mg/l).
- When the test is complete, discard the sample water and rinse the tube several times. I usually keep about 5 ml fresh water in it with the cap on during storage to prevent mineral buildup on the inside of the tube.